TALK TO US NOW07 3393 6552

MRA 451

Interval control unit for use in tumbling, mixing and kneading machines, as well as for shower programmes.
With operating and interval time, 2 pre-selectable motor stages, pause mode, waiting time and a special manual programme.
9 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 450

Interval control unit for use in tumbling, mixing and kneading machines.
With two independently adjustable interval times for motor and vacuum, a special manual programme, waiting time option and operating time shut-down.
9 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 448

Interval control unit for use in tumbling, mixing and kneading machines.
With operating time shut-down, waiting time option before each programme start and manual programme for motor and vacuum.
9 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 444

Timer for installation in kneading machines.
With programmable delay time for belt and compressor.
2 digital inputs, 4 relay outputs, 2 analogue outputs.
9 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 420

 Timer for installation as tumbler and shower control units.
With waiting and operating time clock, adjustable switch-on and switch-off time interval for the shower.
10 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

Aditec MRA Series Controllers

MRA 459

Interval control unit for use in tumbling, mixing and kneading machines, as well as for shower programmes.
With operating and interval time for drum and vacuum as well as a special manual programme, pause mode and waiting time.
15 programmes can be saved (has to be enabled especially under 30)
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 456

Interval control unit for use in tumbling, mixing and kneading machines, as well as for shower programmes.
With operating and interval time for 2 pre-selectable motor stages as well as a special manual programme and waiting time.
30 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 453

Interval control unit for use in tumbling, mixing and kneading machines, as well as for shower programmes.
With two pre-selectable and individually adjustable interval times that run consecutively as well as an overall operating time, a special manual programme, waiting time and an analogue output (0-20 mA or 0-10V).
9 programmes can be saved (2 programmes can be linked at a time)
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

Delivering Quality at The Right Price.


MRA 452

Suitable for use in tumbling, mixing and kneading machines.
With operating and interval time, 2 motor stages, direction of motor rotation, a special manual programme and waiting time.
9 programmes can be saved (can be linked)
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.

MRA 454

Interval control unit for use in tumbling, mixing and kneading machines, as well as for shower programmes.
With operating, waiting and interval time as well as a special manual programme and an analogue output (0-20 mA or 0-10V).
19 programmes can be saved
With rubber seal 96 x 96 mm, with WP-frame (optional) 138 x 138 mm.